The SCUD 800 Mixer is a self-contained skid-mounted chemical mixing station with a 20L drum rinser and a huge granule mixing capacity. Its simple plumbing makes it easy to clean out and easy to use and it can fill a 6000L sprayer in under 10 mins.
In these days of occupational health and safety regulation, this machine gives you a system that shows your staff and safety inspectors that you take your chemical handling seriously by providing them with everything they need to get the job done properly, efficiently and above all- safely.
The SCUD 800 Mixer uses 3-way ball valves on the inlet and outlet. This allows the SCUD to self fill then mix the product thoroughly before being discharged, making it ideal for inline product induction for reticulation. It also has the capacity to mix in a closed system so the SCUD can be left mixing the next chemical batch while you’re spraying.
The 20L drum washer for triple rinsing drums from 1- 20 ltrs and has the capacity to clean and rinse chemical drums, transferring the rinse water into the sprayer which saves time on your fill and doesn’t damage the environment.
Adding the SCUD Pump Kit to the SCUD Mixer takes you to the next level in chemical transfer. The chemical pump and micro-matic fittings allow for the use of envirodrums. The 110L re-useable drums and 1000L shuttles allow for the chemical to be transferred and measured in a closed system eliminating chemical fumes and splash. These drums can be reused up to seven times per drum, reducing the amount of drums that go into landfill.
The waterfold granule mixer is adjustable which allows the operator optimal mixing for each particular product. The 3-way tap on the agitator allows the operator to set it so all the product comes out the top jet, all out the bottom jet or anywhere in between. Setting the flow to the bottom jet will reduce foaming when mixing products that tend to foam.
The third 3-way tap on the SCUD Mixer is a tee port tap which is the tank drain in the middle position when the pump is off. This is also a point where 1000L IBC’s can be connected, allowing chemical to be inducted at speeds of up to 300L/min.
The secret to the success of this machine is the pump. At 750L/min, even the most stubborn granules (ferrous sulphate) will be gone in seconds. The open impeller pump means no blockages, allowing all types of granules and liquids to be mixed
Speed – Can induct liquid product at up to 300L/min.
3-way ball valve – Allows the SCUD to self fill then mix the product thoroughly before being discharged this makes it ideal for inline product induction for reticulation. It also has the capacity to mix in a closed system so the SCUD can be left mixing the next chemical batch while you’re spraying.
Drum washer – For triple rinsing drums from 1- 20 ltrs and has the capacity to clean and rinse chemical drums transferring the rinse water into the sprayer which saves time on your fill and also saves the environment.
Size of an IBC – Has the Footprint of an IBC so easy to work around in a confined space.
Waterfold mixing – Great agitation using the “waterfold” mixing action.
Safety – This machine stops your staff climbing on the back of the vehicle to fill the spray unit.
Related products
Unsure what you’re after?